Multipurpose high-quality DYNAMAX lubricants are suitable for lubrication of bearings and systems that require reliable operation of the part or the entire system. Thanks to a combination of specific properties, such as the excellent water resistance and adhesion to metal surfaces, DYNAMAX lubricants provide optimal protection, low friction and prolong the life of parts as well as entire systems.
-
+ Excellent lubricity + Water-resistant and anti-corrosion properties + EP additives DYNAMAX AK 00EP grease is made on the basis of highly viscous refined mineral oil (viscosity approx. 430 cSt/40°C) with use of a complex aluminum thickening agent and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties and EP high-pressure load. Temperature range of use: from -20°C to +100°C. Even at different temperatures (high and low), the lubricant maintains its mechanical structure, forms a stable and load-bearing lubricating film and does not leak from the lubrication point. Thanks to the additives, provides protection against corrosion in humid environments with excellent adhesion to metal surfaces and reduces wear. Compatible with yellow metals. Thanks to its properties, it helps extend the life of the machine. Intended for lubrication of sliding parts of car chassis, low-speed gears, chains and sliding bearings, working at low speeds and medium loads. Also suitable for lubrication of other open and closed gears using semi-fluid grease, belt chains, power transmission equipment and central lubrication systems. SDS-Dynamax AK 00 EP CLP2017 TDS-Dynamax AK 00EP -
+ Excellent lubricity + Anticorrosion properties + Excellent pumpability DYNAMAX AK 2 lubricant is made on the basis of refined mineral oil with a viscosity of approx. 110 cSt/40°C with the use of a complex aluminum thickening agent and other additives guaranteeing reduced wear, improved antioxidant and anti-corrosion properties. Temperature range of use: from -30°C to +100°C (short-term up to +120°C with regular lubrication) Even at various changing temperatures (high and low), the lubricant maintains its mechanical structure, forms a stable lubricating film, maintains excellent pumpability and does not leak from the lubrication point. Thanks to the additives, it has excellent resistance against flowing water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of rolling and sliding bearings used in industrial, agricultural and other mobile equipment at low and medium loads and speeds. Also suitable for lubrication of axles, joints, threads, small gears, individual and central lubrication systems. SDS-Dynamax AK 2 CLP2017 TDS-Dynamax AK 2 -
+ Excellent lubricity + Anti-corrosion properties + With the addition of graphite powder DYNAMAX AK 2G lubricant is made on the basis of refined mineral oil with a viscosity of approx. 150 cSt/40°C using a complex aluminum thickening agent with the addition of graphite powder to ensure electrical conductivity and protection against seizing and other additives guaranteeing improved antioxidant and anti-corrosion properties. Temperature range of use: from -25°C to +120°C (short-term up to +140°C with regular lubrication) Even at high temperatures, the lubricant maintains its mechanical structure, forms a stable lubricating film and does not leak from the lubrication point. Thanks to the additives, has excellent resistance against flowing water in wet and humid environments and at the same time provides protection against corrosion. Graphite additives increase the bearing capacity of lubrication points, reduce the heat generated during friction, thereby reducing the risk of mechanism seizing. Compatible with yellow metals. Thanks to its properties, helps extend the life of the device. Designed for lubrication of rolling and sliding bearings used in industry, agriculture and transport at high load and speed. Also suitable for lubrication of joints, springs, axles, pins, local lubrication systems and equipment requiring electrical conductivity. SDS-Dynamax AK 2G CLP2017 TDS-Dynamax AK 2G -
+ Excellent lubricity + Water-resistant and anti-corrosion properties + EP additives DYNAMAX LTA 2EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 180 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +120°C (short-term up to +140°C with regular lubrication). Even under high pressure, the lubricant maintains its structure, forms a stable lubricating film and does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of sliding and rolling bearings, working under high loads and high pressures when axial and radial forces are applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to impact loads. Also suitable for lubrication of axles and joints, individual and central lubrication systems. SDS-Dynamax LTA 2 EP CLP2017 DYNAMAX LTA 2EP (TDS, 2018) -
Specifications: NLGI 2 Performance profile: DIN 51502/51825 + Excellent lubricity + Water-resistant and anti-corrosion properties + EP additives DYNAMAX LTA 2EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 180 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +120°C (short-term up to +140°C with regular lubrication). Even under high pressure, the lubricant maintains its structure, forms a stable lubricating film and does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of sliding and rolling bearings, working under high loads and high pressures when axial and radial forces are applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to impact loads. Also suitable for lubrication of axles and joints, individual and central lubrication systems. DYNAMAX LTA 2EP 100 ml (SDS, 2023) DYNAMAX LTA 2EP (TDS, 2023) -
Specifications: NLGI 2 Performance profile: DIN 51502/51825 DYNAMAX LTA 2M is a high-quality multipurpose lubricant with excellent extreme pressure and anti-wear properties, produced on the basis of mineral oil with high viscosity index and lithium thickener. Contains solid MOS₂ anti-friction additives. Designed for rolling, sliding bearings and sliding surfaces. Water resistant. Temperature range of use from -40°C to +120°C. DYNAMAX LTA 2M (SDS, 2023) DYNAMAX LTA 2M (TDS, 2023) -
+ Excellent lubricity + Anticorrosion properties + EP additives DYNAMAX LTA 3EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 150 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +130°C. Even under high pressure, the lubricant maintains its mechanical structure, forms a stable lubricating film, does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Intended for the lubrication of rolling bearings working under high loads and high pressures where radial force is applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to shock loads and vibrations in mobile technology and industry. Especially suitable for road and rail vehicle bearings. Also suitable for the lubrication of small gears with light to medium loads and other lubrication points, including screw connections. SDS-Dynamax LTA 3 EP CLP2017 TDS-Dynamax LTA 3EP