-
VISCOSITY GRADE: SAE 10W-40 PERFORMANCE PROFILE: API SN/SM/CF, ACEA A3/B4 SPECIFICATIONS: MB-Approval 229.1/ MB 229.3, RN 0700/710, VW 501.01/505.00, PSA B712300 Universal high performance fuel saving semi synthetic oil for use in gasoline and diesel engines of passenger car and light vans with or without turbocharger. Unsuitable for diesel engines equipped with a Diesel Particle Filter ( DPF). DYNAMAX PREMIUM SN PLUS 10W/40 (SDS, 2023) DYNAMAX PREMIUM SN PLUS 10W/40 (TDS, 2024)
-
SPECIFICATIONS: VW G 052 025, SUBARUATF,HP,VOLVO 1161640, FORD MERCON V, ALLISON C4,TES 295,CHRYSLER +3,+4,HONDA SP-III,Z1,JWS 3309/3314/3317,MAZDA ATF M-III,M5,VOLVO P/N 1161521,ZF TE ML 03D,04D,14A,14B,17C,LT 71141,LA 23634,MITSUBISHI SP-III,JASO M315-2004,MB- APPROVAL 236.3,5,6,9,TOYOTA T-III,T-IV,VW G 052 055,VOLVO 1161540,ETL-7045E,8072B,KIA SP-III,TEXACO N402,MB-APPROVAL 236.10,11,VOITH H55.6335. XX,VW G 052 162,CAT TO-2,DEXRON IID,IIIG/H,IDEMITSU K17,MAN 3391 V1/Z2,NISSAN MATICD,J,K,VOLVOSTD 1273.4,VW G 052 990,VOLVO CE 1273,41 High quality synthetic fluid specially designed with advanced multi-vehicle additive technology to serve a broad range of vehicles.Exceeds the complex requirements of Automatic Transmission. SDS-Dynamax ATF MV CLP2018 TDS-Dynamax ATF MV
-
DYNAMAX OKVC 150 is designed for the lubrication of piston air compressors and rotary vane compressors with dripping lubrication during undemanding operating conditions.Compressor oil DYNAMAX OKVC 150 is hydrogenated petroleum oil with high chemical stability even in higher temperatures. It contains additives to increase the viscosity index and to decrease pour point.
-
Viscosity grade: SAE 5W-50 Performace profile: API SM/CF ACEA A3/B4 Specifications: MB 229.1, VW 502.00/505.00 Is a high performance engine oil produced by 100 % synthetic technology. It provides maximum performance in petrol, diesel and LPG engines with or without supercharging, working under severe temperature conditions. DYNAMAX RACING SM 5W/50 (SDS, 2023) DYNAMAX Racing SM 5W/50 (TDS, 2017) Do you need an advice? DYNAMAX motor oils and oils of other manufacturers converter.
-
Viscosity grade: SAE 80W Performace profile: API GL-4 Gear oil DYNAMAX PP80 is a petroleum oil containing additives to increase a bearing capacity of the lubricating film.Gear oil DYNAMAX PP 80 is designed for the lubrication of mechanical gear units and final drives (except hypoid), cars and cellular mechanisms exposed to low temperatures. Gear oil Dynamax PP 80 is suitable for gearboxes of vehicles TATRA 148 and 815, Praga V3S and S5T.
-
Oil for two-stroke gasoline engines DYNAMAX M2T SUPER is a distillate from crude oil produced by a modern technology. It contains additives against creation of deposits on the piston grooves, exhaust ports or spark plug electrodes. It also contains additives increasing oil lubricity properties. SDS-Dynamax M2T Super CLP2017 TDS-Dynamax M2T Super
-
Viscosity grade: SAE 30 Performace profile: API CE/CF4 Specifications: MB 228.0, MAN 270, LIAZ 258-1, DAEWOO-AVIA DYNAMAX M6ADSII is mainly used for the lubrication of automotive, tractor, marine and stationary diesel engines of modern structures.Engine oil for lubrication of demanding naturally aspirated or turbocharged four-stroke diesel engines, working under difficult conditions, especially in transitional and summer periods.
-
DYNAMAX OHHM 46 is hydrotreated petroleum oil,with additives to improve oxidation stability,to reduce corrosion and with anti wear qualities and anti-foam additives. Contains a viscosity modifier.Hydraulic oil OHHM 46 is designed for hydrostatic mechanisms with high mechanical and thermal strain, for stable and mobile machines working in unprotected environments. They can be used all year round and are compatible with most of the hydraulic oils from other manufacturers.
-
Viscosity grade: ISO VG 22 Performance profile: ISO 6743/4:L-HM; ISO 11158:L-HM; DIN 51524/2-HLP; AFNOR NF E 48-603 (HM); DENISON HF-0/HF-2; SPERRY VICKERS I-286-S; AFNOR NF E 48-691 (wet), AFNOR NF E 48-690 (dry) + LIFE EXTENSION + ANTICORROSIVE EFFECT Designed for hydraulic wood splitters and other hydraulic mechanisms working all year round in unprotected conditions, even at very low temperatures. Hydrotreated petroleum oil refined with additives to improve oxidative stability, anti-corrosion and anti-abrasion properties. Can be used all year round and is compatible with most hydraulic oils from other manufacturers.
-
Viscosity grade: SAE 5W-40 Performace profile: API SN/CF, ACEA A3/B4/C3 Specifications: VW 502.00/505.00/505.01, BMW Longlife-04, MB 229.51, MB 226.5, Ford WSS-M2C917-A, Porsche A40, GM Dexos2 DYNAMAX ULTRA PLUS PD is the most recommended for latest generation of highly burdened petrol, LPG and diesel engines in cars and light vans,requiring compliance with specifications ACEA A3/B4 and ACEA C3, including the EURO IV emission standards. DYNAMAX ULTRA PLUS PD is a high performance, low emission, year-round ,synthetic engine oil meeting the requirements of mid SAPS (Sulphated Ash, Phosphorus & Sulphur). Oil extends engine life and the life of equipment for treatment of exhaust gases, which are in use in the latest generation of petrol and diesel engines in cars. DYNAMAX ULTRA PLUS PD reduces the ash content in diesel particulate filters (DPF).
-
SPECIFICATIONS: MB-APPROVAL 236.14, SSANG-YONG High-quality fully synthetic automatic transmission fluid specially developed for the last generation MB (NAG-2) 7-speeds automatic transmissions. Backwards compatible to automatic transmissions where a MB 236.12 specification is recommended. SDS-Dynamax ATF MB CLP2018 TDS-Dynamax ATF MB
-
Oil DYNAMAX FORMEX 2 is raffinate of light mineral and vegetable oil with additives, used for coating on steel molds for prefabricated parts. It has good spreadability and already thin layer protects against sticking. Oil ensures perfect separation of concrete from forms, preserves form and reduces wear and improves the quality of surface layers of concrete. Best application to the mold surface is by spraying, can be also applied by spreading.