-
High-performance multi-purpose lithium grease that reduces wear and friction, and perfectly protects against corrosion. Good mechanical stability allows extended grease and therefore wheel bearing life. Excellent EP (extreme pressure) and low friction additives prolong the vehicle life. This oil is suitable for bearing systems in the mobile machinery as well as in industry. It is also recommended for use at higher pressure and speed. It is particularly suitable for rail vehicle bearings. The temperature range: -30 °C / +120 °C (short term up to +140 °C). SDS-Dynamax LTA 3 EP CLP2017 TDS-Dynamax LTA 3EP -
Viscosity grade: SAE 15W-40 Performace profile: API CJ-4, ACEA E9/E7 Specifications: MB 228.31, MAN M3575, Volvo VDS-4, Renault VI RLD-3, MTU Type 2.1, Cummins CES 20081, MACK EO-O, Caterpillar ECF-3/2/1a, DDC PGOS 93K218, Deutz DQC III-05 Super High Performance Diesel (SHPD) motor oil based on 100% synthetic technology with special additives to assure ideal lubrication of heavily loaded trucks. Meets EURO 4 and EURO 5 standards, thus it is suitable for the engines with particulate filters (DPF), EGR or systems of exhaust treatment (SCR). SDS-Dynamax Truckman Plus SHPD CLP2017 TDS-Dynamax Truckman Plus SHPD15W40 -
SDS-Dynamax MF 4T Syntech CLP2017 TDS-Dynamax MF 4T Syntech 10W40Viscosity grade: 10W-40 Performace profile: JASO MA2 Dynamax Motoforce 4T Syntech 10W-40 is fully synthetic motor oil of outstanding quality developed for highperformance four-stroke engines synthetic oil recommended for four-stroke engines. Suitable for motorcycles which are compatible with wet clutches. Creates effective lubricating film which provides antiwear protection. Ensures long engine life without its powerloss. High and stable viscosity index guarantees optimum lubrication even in the most demanding conditions. -
VISCOSITY GRADE: SAE 75W-80 PERFORMANCE PROFILE : API GL-4 SPECIFICATIONS: BMW MTF LT-2, BMW MTF LT-3, BMW MTF LT-4, Ford WSD-M2C200-C, GM 1940182, GM 1940764, GM 1940768, GM 1940004, GM 19259104, Ford WSS-M2C200-D2 MB 235.10, PSA B71 2330, MTF 94, Honda MTF, Honda MTF II/III, Nissan MT-XZ, Nissan MT-XZ TL, Volvo 97308, Volvo 97309, VW G 009 317, VW G 052 171, VW G 052 178, VW G 052 512, VW G 052 527, VW G 052 726, VW G 060 726, VW G 070 726, VW G50, Renault (NFJ/NFP/TRJ/TRT/TRZ) High quality manual transmission fluid designed for passenger and light commercial vehicles using both manual transmissions and transaxles. Not suitable for differentials and other API GL-5 applications. Based on high quality synthetic technology base oil in combination with a special additive package to ensure exceptional thermo-oxidative stability, fuel economy, corrosion protection and outstanding low temperature viscosity provides smoother shifting at low ambient temperatures. Good with a variety of synchronizer materials including brass, carbon, bronze and molybdenum. DYNAMAX Gear 75W80 TRX GL-4 (SDS, CLP2020) DYNAMAX Gear 75W80 TRX GL4 (TDS, 2020) -
Viscosity grade: SAE 5W-30 Performace profile: ACEA C4 Specifications: RN, 0720 MB, 229.51 MB, 226.51 High-performance LOW SAPS motor oil based on the 100% synthetic technology intended to use in petrol and diesel engines of Renault and Nissan cars of the latest generation. It is suitable for use in the engines with diesel particulate filters (DPF). DYNAMAX PREMIUM ULTRA C4 5W/30 (SDS, 2023) DYNAMAX PREMIUM ULTRA C4 5W/30 (TDS, 2023) RENAULT certificate RN720-23-22 -
Viscosity grade: 5W-30 Performace profile: API GL-4 Specifications: Volvo WB 101/102, John Deere J20A/C, Ford M2C 134-D, Case NH MAT 3525, Massey Ferguson M1135/1141/1143/1145, ZF TE-ML 03E/05F/06K, Allison C3/C4, Cat TO-2, Case MS1206/MS1207/MS1210 It is a high quality hydraulic and transmission oil. This high performance universal tractor transmission oil (UTTO) has been developed for heavy-load hydraulic and gear systems with or without wet disc brakes in agricultural and construction machinery.It has a high and stable viscosity index, extremely low pour point, very good stability and resistance against oxidation, high pressure and abrasion. -
SDS-Dynamax OL 22, 32 CLP2017DYNAMAX OL 32 is used to lubricate the bearings of electric motors and rotary machines of small performance and lubrication of bearings and gears of machine tools and textile machinery. Bearing quality oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-termlubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
-
Viscosity grade: SAE 30 Performace profile: API CD/SE Meets or exceeds: MIL-L-2104 C MB 227.0 MAN 270 Summer grade engine oil to lubricate petrol and naturally aspirated four-stroke diesel engines, especially older types, working under undemanding operating conditions. DYNAMAX M6AD (SDS, 2023) DYNAMAX M6AD (TDS, 2024) -
SDS-Dynamax Hypol 80W90 GL-5 CLP2017 DYNAMAX Hypol 80W/90 GL5 (TDS, 2017)Viscosity grade: SAE 80W-90 Performace profile: API GL-5 Specifications: MIL-L 2105D, Autosan S. A., Eaton Truck Components S.A. Gear oil DYNAMAX HYPOL GL-5 80W-90 is a petroleum oil containing additives to increase a bearing capacity of the lubricating film. Mineral oil with very good properties: lubricating, anti corrosion, antioxidant and anti foaming. Gear oil DYNAMAX HYPOL GL-5 80W-90 is designed for the lubrication of mechanical gear units of cars and drive axles, which require SAE 80W-90 oils with a performance level API GL5. It is designed for lubrication of vehicles operating in a very difficult operating conditions. -
SPECIFICATIONS: NLGI 2 PERFORMANCE LEVELS: DIN 51502: KP2K-30, DIN 51825: KP2K-30, ISO 6743-9: L-XCCEB 2, ISO 6743-9: L-XCCHB 2, ZETOR Aluminum complex grease containing antioxidant and anti-corrosion additives. It is intended for the lubrication of plain bearings and rolling at an operating temperature from -30 °C to + 100 °C (for periodic lubrication up to + 120 °C). SDS-Dynamax LTA 2 EP CLP2017 DYNAMAX LTA 2EP (TDS, 2018) -
Viscosity grade: SAE 15W-40 Performace profile: API CH4, ACEA E3/E5 Specifications: MB 228.3, MAN M3275, Volvo VDS-2, Renault Trucks RD-2 DYNAMAX TRUCKMAN X 15W-40 is particularly suitable for use in naturally aspirated and turbocharged four-stroke diesel engines in the trucks of haulage transport, in bus transport, in construction and ship transport. It is also suitable for light commercial vehicles with diesel engines.Oil from the new generation type SHPD (Super High Performance Diesel Oil), recommended for highly burdened diesel engines with turbocharging or naturally aspirated, with improved properties regarding purity piston, polishing the surface of the drum, reducing wear, soot pollution and aging resistance. Allows to reach very long exchange intervals. -
SDS-Dynamax MF 4T Super 10W40 CLP2017 TDS-Dynamax MF 4T Super 10W40Viscosity grade: SAE 10W-40 Performace profile: JASO MA2 Dynamax Motoforce 4T Super 10W-40 – is a high quality semi-synthetic oil recommended for fourstroke engines of motorcycles which is compatiblewith wet clutches. It is based on high quality synthetic and mineral base oils combined with special additives.The oil has a high and stable viscosity index, high thermal stability, good low temperature properties, protects against wear, foaming and corrosion. The oil was produced and tested in cooperation with motorcycle manufacturers. -
SPECIFICATIONS: BMW 83 29 0 429 576, Ford M2C204-A2, Ford 1 384 110, Hyundai/Kia PSF-4 03100-00130, Opel 1940 715, Opel 1940 766, Porsche 000 043 203 33, Toyota PSF NEW-W, Toyota 08886-01115, VW TL 521 46 (G002 000, G004 000 M2), CHF11S, CHF202, Citroen 9979 A1, Land Rover PAS Fluid 14315, RN2261, MB 343.0, MB 344.0, MB 345.0, SAAB 93160548, VOLVO 30741424, ZF TE-ML 02K Green synthetic hydraulic oil developed for highly stressed power steering systems, centralized hydraulic systems and shock absorbers which can reach permanent oil temperatures up to approximately 140 °C. The unique additive package ensures optimal temperature stability, high oxidation stability, excellent cold properties, high shear stability, proven OEM technology. DYNAMAX PSF Synth (SDS, CLP2020) DYNAMAX PSF Synth (TDS, 2020) -
Viscosity grade: SAE 5W-30 Performace profile: API SN/CF, ACEA A1/B1, A5/B5, C2 Specifications: PSA B71 2290, Renault 0700 High-performance motor oil based on the 100% synthetic technology intended to use in petrol and diesel engines requiring the standard PSA B71 2290. The oil is also suitable for the engines which require specification ACEA A5/B5 ACEA C2. DYNAMAX PREMIUM ULTRA C2 5W/30 (SDS, 2023) DYNAMAX PREMIUM ULTRA C2 5W/30 (TDS, 2024) -
Viscosity grade: SAE 85W Performace profile: API GL-4 Specifications: John Deere J20C, Ford M2C 134-D, Case NH MAT 3525/3526, Massey Ferguson M1135/1143/1145, ZF TE-ML 03E/05E DYNAMAX TRACTOR PLUS TXM 85W is a high quality Universal Tractor Transmission Oil (UTTO) composed of carefully selected mineral basic components and advanced additives.It has been designed for high-performance tractors that require one multiple oil for hydraulic system, gearbox, differential, PTO or so called „wet disc brakes“. This oil contains an additive to improve the shear stability index, ensuring an excellent low temperature fluidity. It also contains anti-wear and high pressure additives. -
DYNAMAX OL 46 is used to lubricate the bearings of larger electric motors,fans, etc.., also for long-term fillings of systems for machine tools,for hydraulic system of presses, crank mechanism of piston machines and so on. It is also used for preparation of hardening baths.Bearing oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-term lubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
-
Viscosity grade: SAE 10W-40 Performace profile: API SD/CB Motor oil DYNAMAX M7AD is designed for lubrication of four-stroke petrol and diesel engines of older structures. DYNAMAX M7AD (SDS, 2023) DYNAMAX M7AD (TDS, 2024) -
. Viscosity grade: SAE 80W-90 Performace profile: API GL-4 Specifications: Autosan S. A., Eaton Truck Components S.A. DYNAMAX GEAR 80W-90 GL-4 is a petroleum transmission oil containing additives to increase a bearing capacity of the lubricating film. Mineral oil guaranteeing always good lubricating properties, high resistance to oxidation and high ability to carry the strain. Transmission oil designed for the lubrication of mechanical gear units of cars and drive axles, which require SAE 80W-90 oils with a performance level API GL4. Designed for lubrication of vehicles operating in very difficult operating conditions, such as: high speed and low torque or low speed and high torque. SDS-Dynamax Hypol 80W90 GL-4 CLP2017 TDS-Dynamax Hypol 80W90 GL4 -
DYNAMAX AK 2 is complex, loamy, plastic lubricant that contains antioxidant additives improving anti-c orrosion qualities. It is intended for the lubrication of rolling and plain bearings, operating in medium pressures. Recommended operating temperature range is from -30 °C to +100 °C (with regular lubricating up to +120 °C). SDS-Dynamax AK 2 CLP2017 TDS-Dynamax AK 2 -
VISCOSITY GRADE: SAE 20W-50 PERFORMANCE PROFILE: API CG-4/ CF ACEA E2 (level) SPECIFICATIONS: MB 228.3, MAN M 3275, Volvo VDS, MTU Type 2, Mack EO-L Motor Oil recommended for highly burdened diesel engines with turbocharging or naturally aspirated. Suitable for vehicles in haulage transport, in bus transport, in construction and ship transport. It is also suitable for light commercial vehicles with diesel engines. Not suitable for vehicles with a diesel particulate fi lter (DPF). SDS-Dynamax Truckman HD 20W50 CLP2018 TDS-Dynamax Truckman HD 20W50 -
SDS-Dynamax MF 4T Super 10W50 CLP2017 TDS-Dynamax MF 4T Super 10W50Viscosity grade: SAE 10W-50 Performace profile: JASO MA2 Dynamax Motoforce 4T Super 10W-50 – is a semisynthetic, four-stroke gasoline engine oil developed specifically to meet the special requirements of latest high performance water cooled four-strokemotorcycles. It is based on high quality mineral and synthetic base oils combined with special additives. Provides excellent protection of engine, gearbox and wet clutch. Eliminates clutch slipping and improves drive ability. The oil has a high thermal stability, protects against wear, foaming and corrosion. -
Specifications: NLGI 2 Performance profile: DIN 51502/51825 DYNAMAX LTA 2M is a high-quality multipurpose lubricant with excellent extreme pressure and anti-wear properties, produced on the basis of mineral oil with high viscosity index and lithium thickener. Contains solid MOS₂ anti-friction additives. Designed for rolling, sliding bearings and sliding surfaces. Water resistant. Temperature range of use from -40°C to +120°C. DYNAMAX LTA 2M (SDS, 2023) DYNAMAX LTA 2M (TDS, 2023) -
Viscosity grade: SAE 5W-30 Performace profile: API SN/CF, ACEA A3/B4, C3 Specifications: GM Dexos , 2 MB 229.51, BMW LL-04, VW 502.00/505.00 Motor oil based on the 100% synthetic technology, specially developed for the latest generation of petrol and diesel Opel / GM engines requiring the standard GM Dexos 2. It is back compatible with engines that require the oil standard GM-LL-A-025/B-025. DYNAMAX PREMIUM ULTRA GMD 5W/30 (SDS, 2023) DYNAMAX PREMIUM ULTRA GMD 5W/30 (TDS, 2024) -
Specifications: VW TL 52182, BMW EU 8322 2148578, BMW EU 8222 2148 579 Dynamax ATF Super DSG is a fullysynthetic high performance automatic transmission fluid specially developed for two-link gearboxes of VAG group for very fast and sporty gear shifting. It has a high and stable viscosity index, extremely low pour point. It has very good stability and resistance to oxidation, wear, corrosion and foaming. SDS-Dynamax ATF Super DSG CLP2017 TDS-Dynamax ATF Super DSG
