-
. Viscosity grade: SAE 80W-90 Performace profile: API GL-4 Specifications: Autosan S. A., Eaton Truck Components S.A. DYNAMAX GEAR 80W-90 GL-4 is a petroleum transmission oil containing additives to increase a bearing capacity of the lubricating film. Mineral oil guaranteeing always good lubricating properties, high resistance to oxidation and high ability to carry the strain. Transmission oil designed for the lubrication of mechanical gear units of cars and drive axles, which require SAE 80W-90 oils with a performance level API GL4. Designed for lubrication of vehicles operating in very difficult operating conditions, such as: high speed and low torque or low speed and high torque. SDS-Dynamax Hypol 80W90 GL-4 CLP2017 TDS-Dynamax Hypol 80W90 GL4 -
VISCOSITY GRADE: 0w-40 PERFORMANCE PROFILE: ACEA A3/B4, API SN SPECIFICATIONS: BMW LONGLIFE-01, RN700/RN710, VW 502 00/505 00, PORSCHE A40 Synthetic smooth-running engine oil for gasoline and diesel engines with or without turbocharging and direct injection. Characterised by its excellent cold starting properties, minimisation of fuel consumption, friction and wear. DYNAMAX GOLDLINE FS 0W/40 (SDS, 2023) DYNAMAX GOLDLINE FS 0W/40 (TDS, 2024) -
Viscosity grade: SAE 0W-16 Performance profile: API SN High quality fully synthetic motor oil intended for use in petrol and diesel engines of passenger cars with and without turbocharging and direct injection. This oil is specially developed for hybrid engines. It is distinguished by an excellent start at very low temperatures and reducing fuel consumption, friction and wear. DYNAMAX GOLDLINE FUEL ECO 0W/16 (SDS, 2023) DYNAMAX GOLDLINE FUEL ECO 0W/16 (TDS, 2024) -
Fully synthetic engine oil DYNAMAX ULTRA LONGLIFE FE 0W-20 is exclusively designed for the latest generation of high-performance gasoline and diesel engines of the VW concern (Longlife IV) equipped with or without DPF filter and catalytic converters. Low-viscosity oil with a reduced HTHS viscosity, thanks to which it is possible to achieve fuel savings of up to 4% (VW BLUE OIL). This oil is not backwards compatible with older VW standards. The latest engines of ŠKODA, AUDI, SEAT, VW vehicles (2.0 TFSI 140kW and 3.0 TDI CR 160 kW) operate at elevated temperatures and therefore require a special lubricant that will provide the same and even higher level of performance than the previous generations of engines they replace. Developed to provide a protective oil layer, reduce engine operating temperatures and minimize hydrodynamic friction of the lubricant. At the same time, it protects against wear, corrosion, foaming and is resistant to oxidation. Thanks to these features, it protect the engine, helps cold starting and ensures fuel savings. DYNAMAX GOLDLINE LONGLIFE 0W20 (SDS, 2023) DYNAMAX GOLDLINE LONGLIFE 0W20 (TDS, 2023) -
High-performance fully synthetic motor oil designed for petrol and diesel engines of passenger cars with and without turbocharging. Particularly suitable for engines with “Pump-Nozzle” injection systems (PN) and for engines with extended exchange intervals (30 000 to 50 000 km /per 24 months). Suitable for the engines with or without a particulate filter (DPF). DYNAMAX GOLDLINE LONGLIFE 0W/30 (SDS, 2023) DYNAMAX GOLDLINE LONGLIFE 0W/30 (TDS, 2024) -
+ Avoids the wear of hydraulic lifters + Creation a protection layer which reduces the noise The product reduces wear and tear of hydraulic lifters and eliminates un-pleasant „rattling“ noises. It cleans the hydraulic valve lifters, ensures optimal function and improves cold starting characteristics. DYNAMAX Hydraulic Lifter Care (SDS, CLP2018) TDS-DX Hydraulic Lifter Care -
VISCOSITY GRADE : SAE 75W-140 PERFORMANCE PROFILE: API GL-5(LS), SAE J2360 SPECIFICATIONS: MIL-PRF-2105-E, MACK GO-J, Scania STO 1:0, ZF TE-ML 05D/21D, Ford M2C192-A Synthetic extra high performance multi-functional gear lubricant designed to provide effective lubrication in modern high performance passenger cars, sports utility vehicles and light trucks equipped with both conventional and limited slip differentials. SDS-Dynamax Hypol 75W140 LS CLP2018 DYNAMAX Hypol 75W/140 LS GL5 (TDS, 2018) -
DYNAMAX Hypol 75W85 GL-5 (SDS, CLP2020) DYNAMAX Hypol 75W85 GL5 (TDS, 2020)Viscosity grade: SAE 75W-85 Performance profile: API GL-5, MIL-L 2105E, API MT-1 Specifications: SAE J2360, VW TL 521 45-X (G 052 145 A1), VW TL 521 90 (G 052 190 A2/ G 055 190 A2), MB 235.7, MB 235.74, MB 239.71, MB 239.72, ZF TE-ML 180Universal high-performance transmission oil for use in CVT transmissions, manual transmission of the modern passenger car and light commercial vehicles where an API GL-5 is recommended. Based on special selected high-performance synthetic base oil. It contains package of additives which improves extreme pressure resistance, excellent thermal and oxidation stability, low pour point, saving fuel consumption, excellent protection against the foaming, corrosion and wear. -
SDS-Dynamax Hypol 75W90 GL-5 CLP2017 DYNAMAX Hypol 75W/90 GL5 (TDS, 2021)Viscosity grade: SAE 75W-90 Performace profile: API GL-5 Specifications: MIL-L 2105D, MB 235.0, MAN 342 Typ M-1, ZF TE-ML 05A, 07A,16B/C/D, 17B, 19B, Volvo 97310 Gear oil DYNAMAX Hypol 75W-90 GL-5 is designed for the lubrication of mechanical gear units of cars and drive axles, which require SAE 75W-90 oils with a performance level API GL5. Automotive gear oil DYNAMAX Hypol 75W-90 GL-5 is a synthetic oil with low friction and peak power. It contains special additives to enhance corrosion protection, mitigation wear material. This gear oil has very good low temperature properties that allow optimal operation of all moving parts and facilitate gear shifting in cold. -
SDS-Dynamax Hypol 80W90 GL-5 CLP2017 DYNAMAX Hypol 80W/90 GL5 (TDS, 2017)Viscosity grade: SAE 80W-90 Performace profile: API GL-5 Specifications: MIL-L 2105D, Autosan S. A., Eaton Truck Components S.A. Gear oil DYNAMAX HYPOL GL-5 80W-90 is a petroleum oil containing additives to increase a bearing capacity of the lubricating film. Mineral oil with very good properties: lubricating, anti corrosion, antioxidant and anti foaming. Gear oil DYNAMAX HYPOL GL-5 80W-90 is designed for the lubrication of mechanical gear units of cars and drive axles, which require SAE 80W-90 oils with a performance level API GL5. It is designed for lubrication of vehicles operating in a very difficult operating conditions. -
VISCOSITY GRADE: SAE 85W-140 PERFORMANCE PROFILE: API GL-5 SPECIFICATIONS: MIL-L-2105D, MAN 342 M2, ZF TE-ML 05A, 07A, 12E, 16B/C/D, 17B, 19B, 21A High performance gear oil designed to provide excellent lubrication in a wide range of automotive transmissions, axles and final drives. Is based on high quality refined virgin base oil in combination with a special additive package. SDS-Dynamax Hypol 85W140 CLP2018 TDS-Dynamax Hypol 85W140 GL5 -
+ Excellent lubricity + Water-resistant and anti-corrosion properties + EP additives DYNAMAX LTA 2EP lubricant is made on the basis of refined mineral oil with a viscosity of approx. 180 cSt/40°C with the use of a thickening agent based on lithium soaps and other additives guaranteeing improved lubrication, antioxidant, anti-corrosion properties, thermal stability and EP high pressure load. Temperature range of use: from -30°C to +120°C (short-term up to +140°C with regular lubrication). Even under high pressure, the lubricant maintains its structure, forms a stable lubricating film and does not leak from the lubrication point. Thanks to the additives, has excellent resistance against static water in wet and humid environments and at the same time provides protection against corrosion. Compatible with yellow metals. Thanks to its properties, helps extend the life of the machine. Designed for lubrication of sliding and rolling bearings, working under high loads and high pressures when axial and radial forces are applied (rolling mills, presses, crushers) but also for less loaded bearings, which are, however, exposed to impact loads. Also suitable for lubrication of axles and joints, individual and central lubrication systems. SDS-Dynamax LTA 2 EP CLP2017 DYNAMAX LTA 2EP (TDS, 2018)
