-
It is intended for coolers of modern aluminium and cast-iron cooling systems of combustion engines. Yearly protects the vehicle’s cooling system against frost and corrosion.It guarantees very good heat transfer. It is miscible with cooling liquids based on monoethylene glycol and propylene glycol. DYNAMAX Cool 12 Ultra Readymix-37 (SDS, CLP2017) DYNAMAX Cool 12 Ultra Readymix -37 (TDS, 2017) -
Cooling Liquid produced on the base of monoethylene glycol withspecial anti-corrosion additives. It is specially developed for modern aluminum and alloy cooling systems. Provides all year-long protection of the cooling systems against frost and corrosion. In 2008 received the prestigious award for quality - Slovak Gold. In 2008 DYNAMAX COOL ULTRA G12 was awarded by prestigious Gold Medal and by Certificate of quality trademark Slovak Gold. It contains a substance preventing from the ingestion of coolant. It is applied into a clean cooling system according to the procedure of car producer. It is soluble in drinking water or demineralized water to the required pour point by the producers standards. DYNAMAX COOL ULTRA G12 is miscible with cooling liquids based on monoethylene-glycol (ethylene glycol and propylene glycol). Recommended dilution ratios: 1 part DYNAMAX COOLANT ULTRA G12 : 1 part AQUA - usage to -37 °C 1 part DYNAMAX COOLANT ULTRA G12 : 1,5 part AQUA - usage to -27 °C 1 part DYNAMAX COOLANT ULTRA G12 : 2 part AQUA - usage to -18 °C SDS-DX Cool Ultra G12 CLP2017 TDS-Dynamax Cool Ultra G12 -
It is intended for engine coolers made of light alloys. Yearly protects the vehicle’s cooling system against frost and corrosion. It guarantees very good heat transfer. It is miscible with cooling liquids based on monoethylene glycol and propylene glycol. SDS-DX Cool G11-37 CLP2017 TDS-Dynamax Cool G11-37 Readymix -
Cooling Liquid based on monoethylene glycol and anti-corrosion additives. Suitable for cooling systems of internal combustion engines made of light alloys. Specially developed for vehicles Renault. The concentrated low-freezing cooling fluid protects the cooling system of a motor vehicle against action of frost and corrosion year round. It guarantees very good heat transfer. Recommended dilution ratios: 1 part DYNAMAX COOLANT G11 R : 1 part Aqua - usage to -37 °C 1 part DYNAMAX COOLANT G11 R : 1,5 part Aqua - usage to -27 °C 1 part DYNAMAX COOLANT G11 R : 2 parts Aqua - usage to -18 °C SDS-DX Cool G11R CLP TDS-Dynamax Cool G11 R -
Cooling Liquid based on monoethylene glycol and anti- corrosion additives. Suitable for cooling systems of internal combustion engines made of light alloys. Does not contain nitrites, amines and phosphates. Recommended dilution ratios: 1 part DYNAMAX COOLANT G11 : 1 part Aqua - usage to -37 °C 1 part DYNAMAX COOLANT G11 : 1,5 part Aqua - usage to -27 °C 1 part DYNAMAX COOLANT G11 : 2 parts Aqua - usage to -18 °C SDS-DX Cool G11 CLP2017 TDS-Dynamax Cool G11 -
Cooling fluid based on ethylene glycol and intended for all types of older vehicles, agricultural and construction machines. Protects the cooling system against corrosion year-round and prevents the engine from overheating in the summer months.
DYNAMAX Cool 10 (SDS, CLP2017) TDS-Dynamax Cool G10It is applied into clean cooling system according to the procedure of a car producer. It is soluble in drinking and demineralized water to required freezing point according to the manufacturer’s recommended conditions. Coolant DYNAMAX G10 is miscible with cooling liquids based on monoethylene glycol (ethylene glycol and propylene glycol).
Recommended dilution ratios: 1 part DYNAMAX COOLANT G10 : 1 part Aqua - usage to -37 °C 1 part DYNAMAX COOLANT G10 : 1,5 part Aqua - usage to -27 °C 1 part DYNAMAX COOLANT G10 : 2 parts Aqua - usage to -18 °C -
DYNAMAX CHAIN SAW OIL 100 is a top quality oil used for the chain lubrication, so that the chain does not break or get jammed. It contains a special additive that provides better adhesive strength at the chain to avoid oil loss. It is not suitable to lubricate the engine of the chain saw! SDS-Dynamax Chainsaw oil 100 CLP2017 TDS-Dynamax Chainsaw Oil 100 -
For improved combustibility of the fuel. Increases the cetane number of the fuel up to 5 points. Improved cold starting properties. Application: 150 ml for 60 l of diesel fuel add to fuel tank before every filling up. DYNAMAX Cetane Booster (SDS, CLP2019) DYNAMAX Cetane Booster (TDS, 2019) -
+ Creates a stable wear protection layer + Less running noise, reduced friction and wear High Performance Additive for use in all types of engines. It contains a ceramic component for reduced friction and improved wear protection. Reduced friction and wear ensure increased engine performance, optimized fuel consumption and reduces exhaust gas emissions. DYNAMAX Ceramic Oil Additiv (SDS, CLP2018) TDS-DX Ceramic Oil Additiv -
High-quality copper-aluminum cables and their thick weave guarantee good conductivity, easy and quick use and long-term service life. High-quality insulated clamps ensure a firm grip of the terminals and minimize the risk of accidental short circuit. Thanks to the practical packaging, the cables will always be protected from dirt, securely secured and ready for repeated use. Instructions for use:- Both car batteries must have the same voltage.
- Start the engine of the car from which you want to run the voltage.
- Connect the red clamps to the positive (+) poles of both batteries so that they do not touch other parts of the vehicles.
- Connect the black clamps to the negative (-) poles of the batteries so that they do not touch the red clamps.
- If possible, let the engine of the vehicle from which you want to run the voltage run at high revs.
- If the vehicle does not start within 10 seconds, wait a minute and try again.
- After the vehicle has started, first disconnect the negative (-) poles and only then the positive (+). Keep in mind that the positive poles of the clamps must not touch the negative poles. The red clamps must not touch the metal parts of the vehicle.
- Booster cables with a maximum current load of 400 A, with a length of 2.5M, cable cross-section of 9mm²
- Booster cables with a maximum current load of 600 A, with a length of 4M, cable cross-section of 10mm²
-
Specifications: DEXRON® VI Is a high performance automatic transmission fluid with extended lifetime, specially developed for all GM vehicles manufactured in 2006 or later, equipped with Hydramatic automatic transmission. It is also recommended for automatic transmissions requiring DEXRON® III (G & H), DEXRON® IID and IIE DEXRON® fluid. SDS-Dynamax Automatic ATF VI CLP2017 TDS-Dynamax Automatic ATF VI -
Specifications: Voith G607, ZF TE-ML 03D, 04D, 14B, 16L, 17C, GM Dexron® IIIG, Allison C-4, Ford Mercon MB 236.9, MAN 339 F High quality oil intended for use in automatic gear units of passenger and freight cars, buses, in which the manufacturer recommends the use of oil by GM DEXRON IIID. SDS-Dynamax Automatic ATF III CLP2017 TDS-Dynamax Automatic ATF III
