-
+ Seals critical hairline cracks and small leaks + Helps to avoid expensive repair works For use in all water-cooled cooling systems. Reliably seals critical hairline cracks and small leaks -quick and easy. Also for preventive usage. DYNAMAX Radiator Stop Leak (SDS, CLP2018) TDS-DX Radiator Stop Leak -
+ Improves the performance of thermostats and water pumps + Removes operationally caused contaminations For use in all water-cooled cooling systems. Contains quick-reacting components for removal of operationally caused contamination. Dissolves and removes scale and improves the performance of valves, thermostats and water pumps. DYNAMAX Radiator System Cleaner (SDS, CLP2018) TDS-DX Radiator System Cleaner -
+ Avoids the wear of hydraulic lifters + Creation a protection layer which reduces the noise The product reduces wear and tear of hydraulic lifters and eliminates un-pleasant „rattling“ noises. It cleans the hydraulic valve lifters, ensures optimal function and improves cold starting characteristics. DYNAMAX Hydraulic Lifter Care (SDS, CLP2018) TDS-DX Hydraulic Lifter Care -
+ Dissolves contamination from whole oil system + Improved and stable compression in all cylinders + Avoids recontamination of fresh oil Effective formula that dissolves varnish and sludge deposits from the oil system which restores compression of piston rings. It cleans valves, reduces engine noise and improves combustion efficiency. Pour formula into the existing oil while the engine is off. Idle the engine for 15 – 20 minutes. Drain used oil out of the crankcase and install a new filter. DYNAMAX Oil System Cleaner (SDS, CLP2018) DYNAMAX Oil System Cleaner (TDS,2021) -
+ Creates a stable wear protection layer + Less running noise, reduced friction and wear High Performance Additive for use in all types of engines. It contains a ceramic component for reduced friction and improved wear protection. Reduced friction and wear ensure increased engine performance, optimized fuel consumption and reduces exhaust gas emissions. DYNAMAX Ceramic Oil Additiv (SDS, CLP2018) TDS-DX Ceramic Oil Additiv -
+ Increased wear and tear protection + Compatible with both mineral and synthetic oils + Protects again oil dilution Contains a highly effective additive package for increased wear and tear protection properties of all types of engine oils. Reduces friction and increases the operational reliability at high temperatures. DYNAMAX Engine Care & Protect (SDS, CLP2018) TDS-DX Engine Care & Protect -
+ Increases the octane number up to 3 points + Improves starting and performance properties Additive to increase the octane number of low octane fuels or for use in engines with higher octane requirements. DYNAMAX Octane Booster (SDS, CLP2018) TDS-DX Octane Booster -
+ Optimizes the fuel consumption and exhaust gas emissions + Cleans valves and injector nozzles Ensures effective cleaning of valves, injector nozzles and the inlet area without dismantling. Removes operationally caused contamination in the entire petrol injection system. DYNAMAX Valve & Injector Cleaner (SDS, CLP2018) TDS-DX Valve & Injector Cleaner -
+ Removes contamination and unburned carbon residues in fuel system + Dissolves contamination from carburetor and injection system + Binds moisture and condensed water Ensures effective cleaning of the entire fuel system from the tank to the combustion chamber. Removes operationally caused contamination and prevents formation of new deposits. Also suitable for cold starts in winter period. DYNAMAX Gasoline System Clean & Protect (SDS, CLP2017) DYNAMAX Gasoline System Clean & Protect (TDS, 2016) -
+ Disinfects the complete diesel system / tanks + Stops formation of bacteria and fungi Suitable for use in all diesel aggregates and diesel storage tanks. High-performance concentrate with a wide action spectrum for removing and preventive use against bacteria, fungi and yeasts in equipment that is out of service for a longer period. DYNAMAX Diesel Bactericide (SDS, CLP2018) TDS-DX Diesel Bactericide -
+ Improwed flow and lubrication properties + Prevents again parafine crystals up to -28°C Ensures improved flow properties of all diesel fuels and is suitable for use in all diesel aggregates with or without DPF. Effectively prevents against formation of paraffin crystals, protects and lubricate whole fuel system up to the -28°C (depending on the fuel quality). Prevents corrosion. DYNAMAX Diesel Winter Care Shot (SDS, CLP2018) TDS-DX Diesel Winter Care SHOT -
+ Removes contaminations in the whole fuel system + Optimalisation of fuel consumption + Suitable for common rail technology and pump injectors Contains a selected combination of active substances for protection against wear. Deposits and residues of carbon, oil and soot are properly dissolved and dispersed. Ensures lasting lubrication of the injection pump and all moving parts. Also suitable for high pressure systems with direct injections and Common rail system. DYNAMAX Diesel System Clean & Protect (SDS, CLP2018) TDS-DX Diesel System Clean & Protect -
+ No need to dismantle DPF + Dissolves residures and contaminations + Regenerates full functionality of DPF Highly efficient cleaning fluid for cleaning DPF. Dissolves contaminations in the diesel particulate filter and regenerates its full functionality. DYNAMAX DPF Air Jet Fluid (SDS, CLP2018) DYNAMAX DPF Air Jet Fluid (TDS, 2016) -
+ Dissolves residues and contaminations + Regenerates full functionality of DPF Highly efficient additive combination for cleaning of dismantled diesel particulate filters (DPF). Dissolves contamination in the DPF and regenerates its full functionality. DYNAMAX DPF Cleaning Liquid (SDS, CLP2018) TDS-DX DPF Cleaning Liquid -
+ Reduces soot and exhaust gas emissions + Supports the regeneration of the diesel particulate filter High-performance additive for use in all diesel aggregates to reduce soot and exhaust gas emissions and to increase engine performance. Suitable for all kind of diesel fuels. DYNAMAX DPF Cleaner (SDS, CLP2018) TDS-DX DPF Cleaner -
High performance ashless 2-stroke engine oil to meet the most critical requirements of the latest outboard and snow mobile engines. It exceeds the stringent perfor¬mance requirements of the National Marine Manufacturers Association’s specification NMMA TC–W3®. SDS-Dynamax 2T Outboard CLP2018 TDS-Dynamax 2T Outboard -
DYNAMAX CHAIN SAW OIL 100 is a top quality oil used for the chain lubrication, so that the chain does not break or get jammed. It contains a special additive that provides better adhesive strength at the chain to avoid oil loss. It is not suitable to lubricate the engine of the chain saw! SDS-Dynamax Chainsaw oil 100 CLP2017 TDS-Dynamax Chainsaw Oil 100 -
DYNAMAX M2T SUPER HP is a high quality petroleum oil produced by modern technology containing additives suppressing sediments in piston grooves, exhaust ports, electrodes of spark plugs and also containing additives improving the lubricity of oil. Protects piston from abrasion and engine components from premature wear. Has excellent miscibility with gasoline, forming a homogeneous and stable mixture even at low ambient temperature. Recommended for all two-stroke engines of motorcycles, scooters or hand-held garden tools requiring API TC and/or JASO FD specification. -
Oil for two-stroke gasoline engines DYNAMAX M2T SUPER is a distillate from crude oil produced by a modern technology. It contains additives against creation of deposits on the piston grooves, exhaust ports or spark plug electrodes. It also contains additives increasing oil lubricity properties. SDS-Dynamax M2T Super CLP2017 TDS-Dynamax M2T Super -
Dynamax M4T Super 10W-30 is a high quality petroleum oil produced by modern technologycontaining highlyenriching inghlyenriching ingredients. Creates a durable lubricating film resistant to mechanical stress at high temperatures. It has vera goos resistance to oxidation, protects against corrosion, prevents the formation of deposits. It is fully miscible with other oils of the same quality and viscosity. It is designed for four-stroke engines of modern garden equipment. It is also intended for petrol engines with or without a catalyst. SDS-Dynamax M4T Super 10W30 CLP2017 TDS-Dynamax M4T Super 10W30 -
Aluminum complex grease is water resistant lubricant with excellent adhesion to the metal surfaces. It is used for sliding parts of vehicle chassis, low-speed gearboxes, chains and wheel bearings, operating at low speed and medium pressure. The temperature range: -20 °C / +100 °C. SDS-Dynamax AK 00 EP CLP2017 TDS-Dynamax AK 00EP -
DYNAMAX AK 2G is plastic lubricant manufactured by using a complex loamy thickener and high quality refined base oil. It contains antioxidant additives improving anti-corrosion qualities, and also additive of graphite to ensure electrical conductivity and protection from seizure. It is intended for lubrication of rolling and plain bearings operating at increased pressures. Recommended operating temperature is from -25 °C to +120 °C (with regular lubricating up to +140 °C). SDS-Dynamax AK 2G CLP2017 TDS-Dynamax AK 2G -
DYNAMAX AK 2 is complex, loamy, plastic lubricant that contains antioxidant additives improving anti-c orrosion qualities. It is intended for the lubrication of rolling and plain bearings, operating in medium pressures. Recommended operating temperature range is from -30 °C to +100 °C (with regular lubricating up to +120 °C). SDS-Dynamax AK 2 CLP2017 TDS-Dynamax AK 2 -
SPECIFICATIONS: NLGI 2 PERFORMANCE LEVELS: DIN 51502: KP2K-30, DIN 51825: KP2K-30, ISO 6743-9: L-XCCEB 2, ISO 6743-9: L-XCCHB 2, ZETOR Aluminum complex grease containing antioxidant and anti-corrosion additives. It is intended for the lubrication of plain bearings and rolling at an operating temperature from -30 °C to + 100 °C (for periodic lubrication up to + 120 °C). SDS-Dynamax LTA 2 EP CLP2017 DYNAMAX LTA 2EP (TDS, 2018) -
High-performance multi-purpose lithium grease that reduces wear and friction, and perfectly protects against corrosion. Good mechanical stability allows extended grease and therefore wheel bearing life. Excellent EP (extreme pressure) and low friction additives prolong the vehicle life. This oil is suitable for bearing systems in the mobile machinery as well as in industry. It is also recommended for use at higher pressure and speed. It is particularly suitable for rail vehicle bearings. The temperature range: -30 °C / +120 °C (short term up to +140 °C). SDS-Dynamax LTA 3 EP CLP2017 TDS-Dynamax LTA 3EP -
DYNAMAX OTHP 32 is a crude oil distillate with special additives that provide higher performance. It contains viscosity modifier which serves as a viscosity depressing agent. This oil is suitable for lubrication of automatic transmissions as well as steering and brake boosters. It can be also used for hydrodynamic systems in buses, construction machinery etc. SDS-Dynamax OTHP 32 CLP2017 TDS-Dynamax OTHP 32 -
DYNAMAX TB 46 is petroleum based turbine oil with antioxidant and anti-corrosion additives that improve their performance. It is characterized by excellent oxidation stability, good anti corrosion, anti foaming and demulsification qualities.It is designed for the lubrication of steam, gas and hydraulic turbines, turbo compressors, fast running gear units, can also be used as a hydraulic fluid in turbine control systems and for lubrication of marine turbo loaders of main and auxiliary engines fueled by gases,in circulation systems of machinery requiring turbine quality oils, for example. turbocompressor and turbine pumps.
-
DYNAMAX TB 32 is petroleum based turbine oil with antioxidant and anti-corrosion additives that improve their performance. It is characterized by excellent oxidation stability, good anti corrosion, anti foaming and demulsification qualities.It is designed for the lubrication of steam, gas and hydraulic turbines, turbo compressors, fast running gear units, can also be used as a hydraulic fluid in turbine control systems and for lubrication of marine turbo loaders of main and auxiliary engines fueled by gases,in circulation systems of machinery requiring turbine quality oils, for example. turbocompressor and turbine pumps.
-
Oil DYNAMAX FORMEX 2 is raffinate of light mineral and vegetable oil with additives, used for coating on steel molds for prefabricated parts. It has good spreadability and already thin layer protects against sticking. Oil ensures perfect separation of concrete from forms, preserves form and reduces wear and improves the quality of surface layers of concrete. Best application to the mold surface is by spraying, can be also applied by spreading.
-
DYNAMAX OKVC 150 is designed for the lubrication of piston air compressors and rotary vane compressors with dripping lubrication during undemanding operating conditions.Compressor oil DYNAMAX OKVC 150 is hydrogenated petroleum oil with high chemical stability even in higher temperatures. It contains additives to increase the viscosity index and to decrease pour point.
-
SDS-Dynamax OKVC 100,150 CLP2017DYNAMAX OKVC 100 is designed for the lubrication of piston air compressors and rotary vane compressors with dripping lubrication during undemanding operating conditions. Compressor Oil DYNAMAX OKVC 100 is hydrogenated petroleum oil with high chemical stability even in higher temperatures. It contains additives to increase the viscosity index and to decrease pour point.
-
DYNAMAX Emulgol DS 30 is used in the form of aqueous,cooling and lubricating emulsions in turning steel, cast iron, non-ferrous metals. Recommended working concentration of emulsion (prepared in water with hardness up to 20 ° N) depending on the method and material: 3-5% grinding,5-10% turning, milling, drilling, 10-15% threading. SDS-Dynamax Emulgol DS 30 CLP2017 DYNAMAX Emulgol DS 30 (TDS, 2018)
-
KINEMATIC VISCOSITY AT 40 °C : 6 9 , 3 m m 2 / s VISCOSITY INDEX: 94 Bearing quality oil containing ingredients that benefi cially aff ect oxidation stability and prolong the life of the bearings. It is used to lubricate the bearings of electric motors and rotary machines of small performance and lubrication of bearings and gears of machine tools and textile machinery. DYNAMAX OL 46, 68 (SDS, CLP2017)
-
DYNAMAX OL 46 is used to lubricate the bearings of larger electric motors,fans, etc.., also for long-term fillings of systems for machine tools,for hydraulic system of presses, crank mechanism of piston machines and so on. It is also used for preparation of hardening baths.Bearing oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-term lubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
-
SDS-Dynamax OL 22, 32 CLP2017DYNAMAX OL 32 is used to lubricate the bearings of electric motors and rotary machines of small performance and lubrication of bearings and gears of machine tools and textile machinery. Bearing quality oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-termlubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
-
DYNAMAX OL 22 is designed for fast-running bearings and gears of undemanding machinery and equipment,for hydrostatic mechanisms of older structures of machine tools. It is also used for tools hardening. Bearing quality oils are deparaffined and refined petroleum oils with good oxidation stability. Contain ingredients that beneficially affect the life span of the bearings. They are designed for short-term lubrication of system at normal temperatures, and also to lubricate system with high flow speed. Are also suitable as filling for undemanding hydraulic system.
